CCR2116-12G-4S+
- Forget about CPU limitations in 10G setups with this powerful 16-core ARM CPU based CCR. Double the performance of our previous 36- core CCR, 6x faster BGP performance. Includes an M.2 PCIe slot
- Want to see the full potential of the good, old, reliable 10G networking combined with a modern CPU. CCR2116-12G-4S+ allows you to forget about CPU limitations in your setup. Like its younger brother – the amazing CCR2004, this router features the mighty Amazon Annapurna Labs Alpine CPU.
- But with 16 cores running at 2 GHz, this CCR eats the other one for breakfast. For example, we see at least a 15% increase in single-core performance. And that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues, for example. CCR2116-12G-4S+ sets a new standard of single-core performance in the whole CCR product family! And it supports Layer 3 Hardware Offloading!
- Obviously, you need the right connectivity to harness this power. There are four 10G SFP+ ports. They have a separate, full-duplex line connected to the Marvell Aldrin family switch chip. Then we have Gigabit Ethernet ports. 12 of them are running through the Marvel chip. And there is another Gigabit port connected directly to the CPU. For management purposes.
- Each group of 4 ports has a separate full-duplex connection to the switch chip. No bottlenecks here. You can expect switch-like throughput in most setups. The new generation of processors offers mind-blowing performance. If we look at the CCR1036 - the powerhouse with a 36 core CPU, the new CCR2116 can easily double the performance. 16 cores vs 36 cores. Double the performance. Or even more.
- If you are a rather large ISP, dealing with dynamic routing, massive BGPs, complex firewall rules, and intricate quality of service configurations..This is the right device for you. Combination of raw power and utility with the reliable 10G networking. And yes, like with any ISP-level device, we’ve included a dual-redundant power supply. So you have one less thing to worry about.
- CCR2116-12G-4S+: technology tested by time, built for the future.
Specifications
- Product code: CCR2116-12G-4S+
- Architecture: ARM 64bit
- CPU: AL73400
- CPU core count: 16
- CPU nominal frequency: 2000 MHz
- Switch chip model: 98DX3255
- Dimensions: 443 x 199 x 44 mm
- RouterOS license: 6
- Operating System: RouterOS v7
- Size of RAM: 16 GB
- Storage size: 128 MB
- Storage type: NAND
- MTBF: Approximately: 200000 hours at 25C
- Tested ambient temperature. -20°C to 60°C
- IPsec hardware acceleration: Yes
Powering
- Number of AC inputs: 2
- AC input range: 100-240
- Max power consumption: 83 W
- Max power consumption without attachments: 60 W
- Cooling type: 4 fans
Ethernet
- 10/100/1000 Ethernet ports: 13
Fiber
- SFP+ ports: 4
Peripherals
- Serial console port: RJ45
- Number of M.2 slots: 1
Other
- CPU temperature monitor: Yes
- PCB temperature monitor: Yes
- Mode button: Yes
Certification & Approvals
- Certification: CE, EAC, ROHS
Trenutno nema komentara za ovaj proizvod. Budite prvi koji će komentirati!
Da bi napisali svoje mišljenje o ovom proizvodu potrebno je imati aktivan račun na našim stranicama!
Možete se registrirati kao novi korisnik ili prijaviti kao već postojeći.
Što se tiče najčešćih razloga odbijanja, to je zasigurno neispravna 3D secure potvrda plaćanja (3D secure verifikacija).
Dakle, da bi kupac uspješno izvršio plaćanje sa karticom, potrebno je na sučelju svoje banke unijeti lozinku koju samo on zna. Ukoliko nije siguran koja mu je lozinka, neka klikne na „Zaboravili ste zaporku“ ili neka nazove helpdesk svoje banke.
3D Secure potvrda plaćanja je obaveza koju je definirala banka izdavatelj kartice radi povećanja sigurnosti plaćanja preko weba, a sa kojom vlasnik kartice treba biti upoznat prilikom plaćanja preko weba. Kao kada u dućanu plaćanje karticom potvrđujete PIN-om kojeg zna samo vlasnik kartice, tako se i plaćanje preko weba potvrđuje preko 3D secure sučelja banke izdavatelja pomoću lozinke, šifre, PIN-a kojeg zna samo vlasnik kartice
Već duže vrijeme u Hrvatskoj za plaćanja putem MasterCard, VISA i Maestro karticama je potrebno izvršiti dodatnu autentifikaciju plaćanja.
Dodatne informacije na stranicama banaka:
PBZ kartice:
http://www.pbzcard.hr/hr/online-usluge/3-d-secure-program/domena-izdavatelja-kartica---3d-secure-issuing
http://www.pbzcard.hr/hr/online-usluge/3-d-secure-program
ZABA kartice:
https://www.zaba.hr/home/podrska/koristenje-kartica-na-internetu
Erste kartice:
https://www.erstecardclub.hr/hr/pogodnosti/visa-mastercard-pogodnosti/sigurna-i-brza-kupnja-na-internetu-zahvaljujuci-3d-standardu-mastercard-securecode
RBA kartice:
https://www.rba.hr/sigurnost-transakcije
Napominjemo da svaka banka ima neka svoja pravila:
Primjer 1: Ukoliko se traži unos PIN-a, to uglavnom nije PIN koji se koristi prilikom dizanja novca sa bankomata, već PIN koji se kreira prilikom uključivanja uređaja koji se koristi kod net-bankinga (token, čitač kartica...) ili se šalje na prijavljeni mobitel korisnika.
Primjer 2: Ukoliko se traži unos broja osobnog dokumenta, npr. osobne iskaznice - ukoliko je kupac u međuvremenu mijenjao osobnu iskaznicu, dok ne prijavi novi broj u banci neće mu biti odobrena 3D verifikacija za online plaćanje sa tom karticom
Primjer 3: neke banke odobravaju prva 3 plaćanja bez 3D verifikacije; za svako sljedeće plaćanje je potrebno unijeti traženi podatak za odobravanje plaćanja
...
NAPOMENA: Kako svaka banka ima svoje odredbe oko toga što je potrebno unijeti za 3D verifikaciju (PIN, lozinku, šifru, broj osobnog dokumenta...), uvijek preporučujemo da provjerite sa svojom bankom što je točno potrebno unijeti kako bi se odobrila 3D verifikacija.